|
MN | The GS2 has two comm ports for communicating with other controllers. If you have a greenstar harness in your equipment that has the connectors for the original display then you are using an adapter harness to go from those connectors to the GS2. The wires for comm one are in that harness then all you would need is a PF90277 which will Y into the mobile procesor connector ( the grey one). If you are using a newer style greenstar harness with the round connector on the end then there is a GS2 harness that goes from the round connector to the GS2. There is a harness that pins into the back of the GS2 connector for that harness which is part number PF90363. PF90363 can be used in both situations but in the first you would be plugging it in to comm2 on the back of the GS2 connector. The kit comes with instructions to tell you which sockets the pins go into. But in my experience is has been difficult at times to get the wires inserted in the GS2 connector. Hope this helps and didnt confuse things anymore. | |
|
trying to use a GS2 to log a Raven 440
