|
North west Il. | TedBear I did cut the frame ground to each clutch. I think I have solved the problem Kinze for some reason used 2 different solenoids 2 truecount and 2 Trombetta. I tested both kinds for continuity and found Truecount had 20 ohms resistance and Trombetta had continuity so I called truecount and was told Truecount have circuit board built with over heat protection and where kicking out but trombettas dont have circuit board so they keep on working. I swaped trucount with trombetta and my problem followed the trucounts . So truecount is sending me out 2 more trombettas . Thanks for the help !! Phil | |
|
seed command on kinze planter help !!!
