AgTalk Home
AgTalk Home
Search Forums | Classifieds (85) | Skins | Language
You are logged in as a guest. ( logon | register )

Lx665 Skid Steer glow plugs
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
RodInNS
Posted 4/13/2007 23:31 (#136321 - in reply to #136283)
Subject: RE: Lx665 Skid Steer glow plugs


Well, if you got that far you can either pull the plugs and check for an open or low resistance, or just plain replace them all. I'd guess that if one or two are dead for some reason, the rest are soon to follow. As long as you know you have good power to them and all the connections are good.... Other than that, I don't know the value for those plugs, so I'd just play it by ear to see how they checked out if you do that. One other check might be to pull them and check to see if they actuall heat and turn red or make heat.... but I'd be careful with that. I think they're all hooked in parallel, so it shouldn't be a problem to do them one at a time. Good luck.

Rod
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)