|
South Georgia | No, I don't know why, but doofus didn't think of that while I was in there. I don't think that the evaporator is the problem, though, as I've got lots of airflow out of the vents. The filters aren't the problem, as the fresh air filter is new, and the recirculation filter is clean.
What pressures should I have? I was thinking that the high side being around 200 was about right. Is that too high?
I wondered about the expansion valve, as I thought anytime you replaced the compressor, it was S.O.P. to replace the dryer and expansion valve also, inasmuch as you've already spent a pile of money on labor, freon, and the compressor, so why not go ahead and do the lower-cost items while the system is open?
Thanks for the suggestions,
Adrian | |
|
4055 A/C problems...
