|
SEON | I'm a LBX guy with a old Hesston or two kicking around but......how much hay are you putting in a flake? I had this happen to me once and it turns out the dealer mechanic adjusted the tension on the adjustment spring by moving the lever a couple of notches. This means the stuffer trips more often meaning less product in the pre compression chamber. After the flake is in the chamber,the plunger can only do so much.
Took me a while to figure that one out.
Edited by rank 9/9/2010 11:35
| |
|
Massey Fergusson 2190 Baler Problem
