|
| It shouldn't be too bad. Off the top of my head you are going to need a field hitch to bolt to the back of the toolbar if the cart didn't already come with one. You will need to extened or replace the CAN harness through the toolbar, my guess is that you should be able to just replace the terminator with a rear hitch extension harness if there is a blockage remote installed on the toolbar. Airlines & couples should flip around withouth much trouble. That only leaves the 3 hydraulic lines to run through the toolbar to the cart. Are you looking for part #'s or just a general idea of what you need so that you can fabricate it yourself? | |
|
help with a jd strip tiller and a 1910 cart
