Posted 8/21/2010 20:45 (#1325973 - in reply to #1325755) Subject: Re: Gleaner guys- shimming CDF rotor above concave
nwks
you can get a kit from agco. the kit from agco will come with 1/2 in spacers. after talking to some ppl i decided to go with 3/8 in spacers. i made my own. it was not hard had to have longer bolts. it helped the backfeeding problem (that was the reason for the mod) i did not balance after. i would suggest going with the 1/2 and it might help the backfeeding even more. ps dont waste your money on a precison rotor if u want it for corn.