|
NW Ohio | I'm considering getting floater tires for JD9510. I'm running a 6 row corn head. I'm thinking that 73x44-32 would work based off of measurements from a tire chart. Will I have to add any axle extensions to run them? If so, will the extensions set the tires out any further? Is anyone else running floaters with a 30" 6 row head? What size? What is the best size to run on the rear to match the 73x44-32 fronts? 54x37-25's or 48x31-20's ? I don't want the front end too high or too low. These are for a 2 wheel drive machine. From what I've found out, it looks like I'd probably need to run stalk stompers on the rows where the tires run to reduce possible stalk damage, right?
I'm interested in some used wheels/tires in good shape. Some tread wear is fine if the rest is good. Also may be interested in a ladder extension. Can send replies and photos to [email protected]
Thanks! | |
|
Floater tires on JD9510??
