|
| We don't have a 8920, we have a MXU 135, and I have accross the windshield a one inch square tube with holes every inch. I mounted the T2 controller on the left side of the tractor vertically, outlets down. The lightbar is mounted in the center of the bar and the PF3000 for recording sprayer and planter passes is on the right side. There is a second square tube on the right side going to the rear of the tractor which has the various sprayer controllers and the keypad for the steering. Later the planter monitor will go in front to the right as well.
This is the first year for the steering and for this sprayer with all of the controls and controlers, I think I am going to be electronically challenged.
If there is any way to fasten a bar accross the front of the tractor this certainly is a good place to mount the T2. I took some pictures of it today but they didn't come out right. Will try again on Monday.
Hope this helps
John EIA | |
|
Best place to mount the T2 controller for EZ-Steer in an 8920 CIH?
