 Blvd d'Espair Bowhill, Sth Aust | We had a CR1225, which means it had the Cat engine, instead of the Cummins.
Three issues we had with with ours..
1. The "Uniball" cats-eye type bearings for the articulation joints would wear severely. For us, less than 2000 hrs life. It may be an operating conditions thing.; I dont know. i do know they were greased every 10 hrs as recommended.
2 The diffs. ( row crop axle models) and gearbox are Allis Chalmers built, and there is a gear that connects two splined shafts, high up in the gearbox. It is accessible by removing the seat and panel in the cab floor. It doesnt get enough lubrication, and will strip the splines. When it does, you lose foward and rearward motion, as well as hydraulic and steering function.
3 The air con is hopelessly inadequate for our summer conditions. Yours may or may not be as difficult.
|