|
Eastern Half of Kansas | Baler is the same as a CIH 8575, CIH 8570 and Hesston 4750 are the same and a series older than a 4755. A Hesston 4760 is a series newer than a 4755. The 4900 and 4910 hesstons are 4x4 balers. 4790 hesston is a 3x4 baler. 30k is inline for a 4755, just try to educate yourself and get someone to help you look if possible. Imo, about 30,000 bales the baler could/usually can take $5-6k of work. Pofarmer is right on capacity and the pickup is a weak point we just put $1000 in our pickup on a 4760, and I think its heavier than a 4755, but it head needed some attention for a while. Not sure where in IL you are but I may have two contacts for you in IL to help you or ask questions to, one is a dealer, our baler came from IL. Please post back with a town if you dont mind. Other than not holding the twine in the knotter, the knotters aren't much different than a small baler. You may want a preservative system in IL for poor drying conditions and humidity. Maize is very helpful with discounted parts. You can call down and they will give out any information they know. If you call by 4:30 the parts go out that same day UPS. We get them the next afternoon or late morning. | |
|
Hesston 4755 baler
