|
| One thing to keep in mind when manually changing the PWM Min's and Max's. As soon as you change those settings in the CAN smartrax the system will automatically switch to "Manual" and you will have disabled the learning ability of the system. This means as you run in different field conditions the system can no longer adapt to these. So my suggestion, and it is just that, is after you change those settings and hit the green check to go back to the previous page, you will see a little blue box towards the bottom of the screen and it will say "MAN", just tap the icon to turn it back to "Auto". This will re-enable the learning on the system. I would venture to say that it is not a bad proportional valve as you would more than likely see it hanging to one side more than the other when this happens. If you would like to post you PWM #'s for us to see I could probably tell right away of you had a bad valve.
| |
|
Raven Smartrax Problems
