Posted 5/13/2010 09:29 (#1197572 - in reply to #1197412) Subject: Re: Greenstar 2600 with Dickey John anhydrous
Saskatchewan
I have it set up as a standard control valve. The calibration number on the flow sensor is 02.26, where do I enter this number, in the control valve calibration box or flow meter calibration box. Neither one will let me enter decimals so do I multiply by 10, or 100. And what do I enter as the flow meter units L, 10L, Gal, or 10 Gal.
Will I need any more info to get it set up
Thanks Ken
Greenstar 2600 with Dickey John anhydrous
