| Phainein7 - 11/16/2026 08:16
Some modern dual-frequency receivers tighten this slope to 0.5 ppm, meaning horizontal error only grows by 0.5 cm per 10 km.
>workable for steering
Unless doing something like ridge tilling, RTK is not needed with newer GNSS receivers using L1, L2, and L5, along with GPS+GLONASS+Galileo+BeiDou.
Pass-to-Pass Accuracy - Over one hour window, the standard WAAS baseline deviates some 15–30 cm (6 to 12 inches), whereas with L1, L2, and L5, along with using GPS+GLONASS+Galileo+BeiDou. down to sub-decimeter repeatability (often 2 to 5 centimeters or 1 to 2 inches).
So if we got a GFX 350 or GFX 750 with a Nav-500 or Nav-900 with just the free corrections would it be accurate enough for planting and not have to shift/nudge?
As for what we have now is a Ez-Guide 500 on WAAS with Ez-Steer. So if I did use a Android phone do I need just Lances NTRIP app or do I need a terminal app beside, and how do you tell if the phone supports SPP?
Thank You.
Edited by White-Tractor_Man 11/18/2026 06:42
|