|
 East of Broken Bow | You're supposed to work the shingle shovel uphill, that way as the layers peel up, the lower layer gets the layer above it loosened up. Pulls out a lot more of the nails that way, as well.
The second tool appears home-made, and to me seems like something to peel lathes off of old plaster and lathe walls. The wall stud would fit in the groove in the center, and the prongs would peel the lathe off the stud from both sides. If you ever tried peeling lathe off studs from just one side of the stud, you'd wind up breaking a bunch of the lathe. Going from both sides they would peel off easier. I've done the work with a pallet knockdown bar, but this one would likely work better as the prongs are much longer. | |
|