AgTalk Home
AgTalk Home
Search Forums | Classifieds (35) | Skins | Language
You are logged in as a guest. ( logon | register )

RTK into CFX 750?
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
Phainein7
Posted 11/16/2026 08:16 (#11803957 - in reply to #11803788)
Subject: RE: RTK into CFX 750?


Tipton, KS
JackW_EviewGNSS - 11/15/2026 23:08

11 and 16 miles (about 18 and 26 km) are workable for steering. With a single CORS base, horizontal error grows by roughly 1 cm for every 10 km, on top of the base's own accuracy....


Some modern dual-frequency receivers tighten this slope to 0.5 ppm, meaning horizontal error only grows by 0.5 cm per 10 km.

>workable for steering

Unless doing something like ridge tilling, RTK is not needed with newer GNSS receivers using L1, L2, and L5, along with GPS+GLONASS+Galileo+BeiDou.

Pass-to-Pass Accuracy - Over one hour window, the standard WAAS baseline deviates some 15–30 cm (6 to 12 inches), whereas with L1, L2, and L5, along with using GPS+GLONASS+Galileo+BeiDou. down to sub-decimeter repeatability (often 2 to 5 centimeters or 1 to 2 inches).

Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)