|
King City, Mo | Thanks for the detailed response.
Ive done creep feeding in the past but wasnt planning to again…. So gave my creep feeder to my BIL.
I have thought about an ear corn picker but my time
Is already stretched in the fall.
I have no screens on the grinder.
I run it at 1720rpm on a 4455 deere. The wd worked but the strait pipe was way loud and i tore up the pto connector on the wd grinding popcorn with it. So i replaced it and then grind with the 4455.
Did popcorn, ddg, oats, soy meal.
$117ish a ton plus grinding and reject popcorn so autta
Add lbs to the beef and make
Some eggs.
 (IMG_3538 (full).jpeg)
 (IMG_3543 (full).jpeg)
Attachments
----------------
 IMG_3538 (full).jpeg (396KB - 2 downloads)
IMG_3543 (full).jpeg (50KB - 1 downloads)
| |
|
Popcorn feed analysis results
