Viewing a thread - Bulk feed bin with less cone angle

You are logged in as a guest. ( logon | register )

Bulk feed bin with less cone angle	View previous thread :: View next thread
Forums List -> Stock Talk	Message format

Yellowbrickroad

Posted 11/10/2026 07:53 (#11799267 - in reply to #11799171)
Subject: RE: Bulk feed bin with less cone angle

I had a 60 degree bulk bin for soymeal. It always seemed like I had flow issues when I would get a load in that was still warm from the plant. I switched to extruded meal that left a portion of the oil in the meal. No more flow problems.

Bulk feed bin with less cone angle - roo : 11/9/2026 05:11
- RE: Bulk feed bin with less cone angle - robbertsfarms : 11/9/2026 07:33
- RE: Bulk feed bin with less cone angle - StewartMD : 11/10/2026 06:28
  - RE: Bulk feed bin with less cone angle - Yellowbrickroad : 11/10/2026 07:53

Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)