|
| I've got a Brandt bale processor does round or square bales. I've always loaded bale on arms, cut net to one side of bale low down by forks. Flip it over bale, then load bale. Net will pull off top of bale. Then load second bale on forks and process bales.
Guy complain about net or twine freezing on bales in winter. We just figure about number of bales for a week or two. Turn them on bale side frozen towards south side towards sun, drop bales to knock snow off while doing that. Just some management of bales to turn tops to sun, they will burn off.
We also load a lot of 3x4 square bales with a Deweze bale bed to fed off flatbed. Do the same with 3x4's, never a problem taking twine off.
| |
|
Net wrap & bale processors
