Near Intersection of I-35 & I-90 Southern Mn. | I can believe this would happen since the 350 is designed to measure a much higher seed rate such as would be the case with corn or soybeans. The acre counter starts/stops based on seed flow also.
Speeding up might be the answer but is probably not practical.
A thought which probably wouldn't work but would be easy enough to try would be to purposely enter a speed cal that makes the monitor think that you are going slower than you really are. This might fool the internal electronics into thinking that the seed drop rate is within an acceptable range.
If this works, the displayed population would be incorrect but might be representative of the true population. Possibly it would also warn you of a row failure which is probably your main goal. |
JD Planter monitor Cumputrac 350 not counting Pumpkins Seeds
