Near Intersection of I-35 & I-90 Southern Mn. | I would think this should be possible with the GO 10 since it seems to work with the InCommand.
I use Headsights Truesight II for feeler steering on my Deere combine and corn head. The Truesight needs ground speed. I could have used a GPS hockey puck speed sensor but I was able to use the speed from my InCommand 1200 that is using an Ag Leader 7500 unlocked and subscribed to Terra Star Pro C. Sounds like you have been successful with an InCommand also but have not been successful when trying to do the same with a GO 10?
I don't remember if there was some type of setting change that I needed to make within the InCommand. I believe I needed to inform the Truesight II that I wanted it to use the speed from the InCommand instead of an outside source. Possibly this is the step you are missing. I installed it a couple of years ago and haven't needed to make any changes. My memory is fading.
Edited by tedbear 11/1/2026 08:31
|
Ag Leader Virtual Terminal speed not detected
