|
Very southern Mn | I think bin unload dia has a lot to with it as well. 10” unload, 8” sweep , 48 on up dia, if you are keeping unload full, it would take quite a man to shovel and sweep behind the auger unless sweep is set perfectly to only leave a 1/2” on the floor which is just about impossible on a larger sweep to run that close because a 24’ or 30’ sweep will usually sag slightly ,( I know most have some kind of wheel to hold up) so you have to set abit higher so it doesn’t get caught on floor splices etc. A lot of difference between a 24’ bin and a 60’ bin. | |
|
Settle this debate
