|
sc kansas sw of Wichita | local independent combine repair guys do that all the time at those sep hours. they pull feeder house off remove accelerator beater and shaft and have a jig made to pull rotor out with a forklift. they than remove the front two rotor covers then they replace the rh rail wear guard and weld in a left hand hardened steel guard on to the rail. while rotor is out they inspect the rest of the rotor cage and weld up any thin spots that may need addressed. than reinstall new covers . also while rotor is out they replace the rear drive coupler that is bolted to rear of rotor | |
|
Jd 9770 top rotor cover?
