|
| We have a pole building that will need to be taken down to be replaced with new.
Been thinking how to remove the steel sheet siding and roof by cutting nail heads rather than demoing it with an excavator. Likely nails everywhere with the excavator. Does anyone make a battery powered nail puller? Or would an angle grinder work ok. Don’t need to save the tin, just wanted it to go in a dumpster. Seems they weren’t shy about using lots of lead head nails when it was built. It’s a 30’x60’ so lots of tin to put into a dumpster.
Did a google search but only saw the old slide hammer type and ones that would hammer the nail out from the pointy end. Haven’t been milking in 45 years so I figured I’d be worn out using the pliers type clippers in short order.
Thanks in advance.
D James
Central PA | |
|
Removing nails from steel siding
