|
North Dakota | Hi. I am replacing my primary countershaft on my 9770 cause it has a vibration in it. When I took off my electric clutch I noticed the bearing sounds very dry and it should be replaced. Taking everyhting apart looks like it is very difficult to press out the bad bearing. Its has notches on the side the bearing should be pressed out. Just checking if their is a way to replace the $80 dollar bearing or if I have to buy the whole clutch assembly. Seen on other post they bought the whole assembly but just seeing if anybody had luck getting the bearing out. Any advice will be helpful. Thanks in advance. | |
|
9770 Elecrtro feeder house clutch Bearings?
