AgTalk Home
AgTalk Home
Search Forums | Classifieds (88) | Skins | Language
You are logged in as a guest. ( logon | register )

hooking slectro to an ez boom
View previous thread :: View next thread
   Forums List -> Precision TalkMessage format
 
tedbear
Posted 4/23/2010 12:05 (#1171393 - in reply to #1171086)
Subject: RE: hooking slectro to an ez boom


Near Intersection of I-35 & I-90 Southern Mn.
chopperfx40 - 4/23/2010 05:19

I bought a slectro system and trying to hook it to my ez boom system. Everything hooked up fine but when I went to try it nothing worked the ez boom and ez guide 500 appear to be working but I'm not getting power to my slectro's. If anyone has any ideas the help would be greatly appreciated planting seasons here and I need HELP!!! THANKS


I don't have experience with Slectro and EZ-Boom but I did set one up for use with an Insight and a Clutch Control module. The wiring was straight forward but I questioned the ground that seemed quite light if all Slectro wheels were to be engaged (to stop planting) at the same time. This was through the Slectro harness to the tractor.

There seems to be some confusion about the setting of using an inverter harness or not with EZ-Boom. The menu selection may not work correctly with the current firmware. The Slectro relays can be rewired if necessary.

The symptoms would be that you are getting action on the Slectro but it is reversed of what you desire.

Doesn't sound like this is your situation however.
Top of the page Bottom of the page


Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)