|
SW Iowa | Here is the bracket I have in all my SG tractors for mounting things:
https://www.sloanex.com/john-deere-soundgard-tractor-cab-monitor-bra...
You are correct that the autotrac resume switch is momentary and the implement switch is a toggle. However, the resume switch that comes with the ATU is three position. There is an OFF position, ENABLE position (toggle), and RESUME (momentary) position. You could tie your implement switch input on your display to the enable position on the switch and use it to simultaneously turn off mapping and autosteer at the same time. When turning back on, you would start mapping with the resume switch in the middle position and start steering when you hit the momentary position. | |
|
JD GPS system switch question.
