|
custar ohio | Sounds like a profitable venture. There are some out there if you turn over some stones.
Are you running small wires? I was very impressed with the sample in good wheat from the AF. Hope to replicate it in my oats.
I wanted to thank you for the AF input last week.
Found out that the cross-auger drive pulley that had a shear bolt problem was out of spec.
Seth, the AF guy, found a very slight slop in ours and we replaced them both and never had another issue.
The bushing insert had maybe been die grinded out to fit or just a factory issue. Allowed the shear bolt to absorb the impact. | |
|
Harvest going well in north Iowa and mill
