NE South Dakota Clark, SD | All you need is a 12 pin Deutsch with a live power, switched power and ground. If you want to be able to change settings on the tripod then you need a more expensive harness. I always configure while hooked to a tractor, turn off key to save settings and put it on the tripod. Remember that every time you power it back on in Quick Survey base mode it will recalculate your base position. It could be within inches or could be 200 ft off, 5 to 20 ft difference is very common. If your control system has a benchmark function, you can correct with that. |
Greenstar 3000 RTK base station set up
