Posted 6/28/2026 10:30 (#11686802 - in reply to #11686641) Subject: RE: John Deere 4430 low clutch valve pressure
South Ga
johnypop - 6/28/2026 08:03
blowsand - 6/27/2026 10:47 Before you dig any deeper, double check that your arm on the operating valve housing can, and is fully returning. I’ve seen small rocks, dried out and packed in oil and dust etc get between that arm and the aluminum housing and cause issues.
He had that housing off with new o-rings and gaskets as he stated in his first post.
Correct, and I’m not saying that the clutch isn’t burned up but that shouldn’t have anything to do with the clutch valve pressure I don’t believe.
John Deere 4430 low clutch valve pressure
