Posted 6/28/2026 08:03 (#11686641 - in reply to #11686476) Subject: RE: John Deere 4430 low clutch valve pressure
ND
blowsand - 6/27/2026 10:47 Before you dig any deeper, double check that your arm on the operating valve housing can, and is fully returning. I’ve seen small rocks, dried out and packed in oil and dust etc get between that arm and the aluminum housing and cause issues.
He had that housing off with new o-rings and gaskets as he stated in his first post.
John Deere 4430 low clutch valve pressure
