|
Adrian MI | I've got a Deere 4640 that the draft sensing cylinder is leaking or draining hydraulic oil out the top fitting. I've replaced the rubber hose and fitting that goes into the side of the transmission housing, but the line just blows out. Tried blowing air into the fitting and seems to be plugged.
We don't use the 3 point on this tractor. Can I just plug the 2 hydraulic lines that go to the load sensing cylinder? Or not?
Thanks
Jason
 (KIMG5141 (full).JPG)
 (Screenshot_20260628-080416 (full).png)
Attachments
----------------
 KIMG5141 (full).JPG (230KB - 2 downloads)
Screenshot_20260628-080416 (full).png (149KB - 1 downloads)
| |
|
Deere 4640- draft sensing cylinder issue.
