|
Croswell, Michigan | First off my bin set-up is what 30 years of short sightedness looks like.
I added another 36’x 13 ring bin this year. First two have blower pipe up the side. We lay pipe on the ground from the air lock to each bin. When one is full we move and add pipe to fill the second. I want to clean all this up and have a permanent pipe from the dryer to the first bin and then a single overhead pipe down the center to connect all three. I can’t believe what this project is going to cost. I need two diverter boxes at bin one and two to either drop grain down or send it down the line. These boxes are $6000+ each. Surely there is a more economical solution like a simple ‘T’ that can divert grain one way or another??
I want this to look nice and neat and would really like one single pipe across top rather the a bunch of pipes.
 (IMG_7714 (full).jpeg)
 (IMG_7719 (full).png)
 (IMG_7717 (full).jpeg)
Attachments
----------------
 IMG_7714 (full).jpeg (130KB - 3 downloads)
IMG_7719 (full).png (135KB - 2 downloads)
IMG_7717 (full).jpeg (173KB - 1 downloads)
| |
|
Need bin air system ideas?
