|
| G'day tc22, For the nozzle to use, pretty much the label is going to require the MR110-10s over the ER110-10 as the ERs are a conventional flat fan nozzle and would be too drifty for Enlist. For the pressure, the chem label allows the MR110-10 to be sprayed up to 70PSI, but often the PWM system manufacturers suggest you keep PWM pressure below 60PSI to minimize poppet wear.
Again, the MR110-10 isn't what I'd call an ideal Liberty nozzle as it is quite coarse, but the Enlist part forces your hand to keep the driftable fines in check over pushing the envelope for better Liberty coverage.
Again, for the Enlist nozzle label, you'd be able to use the MR110s as the finest of the allowable nozzles on label. Technically there would also be the Wilger SR80-10 on label that would be a finer series, but I'd only use that if your boom height would be typically like 30-36"+. (Need to ensure minimum boom height with a narrower nozzle pattern so you still have 100% overlap).
For the adding of coc/mso with the AMS, I couldn't help you too much there.
-Lucas | |
|
To The wilger rep or anyone
