|
Mid-Missouri | While pumping water, but you are done with tote and about to unhook hose, shut valve on tote. Almost shut valve on hose connected to tote ( I assume you have a valve on the hose next to the camlock fitting going to tote). Open the cam-lock on one side and allow the suction to clean this connection point for a second. You will hear it. Fully shut hose valve and remove hose. If you orientate the hose and valve to where it sucks the cavity empty from the bottom side of the hose, it will be very empty of product. | |
|
What is the cleanest and best way to connect 1.25" how to chemical IBC
