|
North Central Illinois | If you have all the wiring to run the Raven 440 still on the bar that runs to the flow meter and the valves, all you need is a John Deere Rate Controller, A 37 pin to 16 pin adapters (PF90599), a front ISO extension Harness (BPF11284) and a constant power harness ( for a Row crop tractor BPF10403 or for a articulated tractor BPF10404). The 37 pin side of the adapter will plug into the John Deere Rate Controller and the 16 Pin side will plug into the existing Raven Harness. Then you just need to set up the rate controller correctly with the Flow Meter Cal # that should be on a tag on the Flow Meter and a Valve cal # that should be on the main on off valve by your cooling tower. | |
|
Converting from a Raven 440 to JD Gen 5
