|
Faunsdale, AL | Anyone have any old Banjo motorized ball valves? They’re KZ valves off an old SpraCoupe 4640. Don’t think they were original, they were manufactured in 2015. They have the EH3 motor on them. It has a small clear plastic screw on cap on top of the square black motor housing. You can see the plastic arrow that indicates whether valve is closed or open through the screw cap.
I need a circuit/relay board out of one. I tested the motor without disconnecting from the circuit board and let the smoke out of something. Then I found a broken wire in the plug that connects the motor to the sprayer wiring harness……..grrrr!
So I can use a leaky, worn out or cracked valve if anyone has any for sale. Could also use functional valves for complete spares. These individual plastic valves bolt together with 4 bolt flanges to make a manifold of 5 valves and a T that feeds solution from control valve and flow meter into it.
Will try to get a screen grab of the actuator.
 (IMG_1555 (full).png)
Attachments
----------------
 IMG_1555 (full).png (99KB - 5 downloads)
| |
|
KZ (BANJO) motorized ball valves
