|
Strasburg North Dakota | My cousin has a Ag leader insight in his sprayer and lately he has been getting the message when he starts it that he needs to calibrate the touch screen. Sometimes lately it’s been every time he uses it. It wouldn’t be so bad but the first thing that pops up on the screen in the liability notice for his boom height and this doesn’t allow you to do the calibration so you have to power the display off and unplug the boom height. Then when you start it up again you enter a service mode so you have to restart the screen again. Then once you restart it and do the calibration you have to shut it down again replug in the boom height and start it up again. So it’s a bit of a process. Why is it wanting to do a calibration so often? Is the screen going bad? We have another insight we’re not using but it doesn’t have all the unlocks he needs. Could we just switch the screen part of the display? | |
|
Ag Leader Insight Screen Calibration
