|
Central ND | An RTK unlocked 252 or 262 should work. You send signal into the 500 by the serial port. I currently run a 500 with a 262 just on WAAS. Haven't had time to do the RTK just yet. You can make your own cable from the 252/262 into the 500, at least I did anyways.
But like others mention RTKonnect for the 252/262 is the way to go. I have 2 of them. You'll need a way to configure the 252/262 as well, whether through a Pro 600/700, dealer, or the right program/cable and a PC.
I Just use mobile hotspot through my phone as well. I run my own base station so all my phone does is the hotspot. Just have to remember not to walk to far away with the phone or you'll drop connection with the RTKonnect and have to wait a few to get corrections again.
Edited by case 5/16/2026 11:30
| |
|
Setting Up EZ-Guide 500 For RTK Help
