|
East Central Missouri | http://manuals.deere.com/omview/OMFH309531_19/PP98408_00001FE_19_08...
Timeout error during net wrapping cycle: check for obstruction or binding.
My vote is for not enough electrical power. I fought a new to me baler(567) with no net wrap experience. I had dealer tech out and he solved some gate adjustment(or sensor adjustment) issues and I was concerned about voltage. He watched voltage on monitor as I baled, said it was within spec. 7810 using factory convenience outlet. After 25 or so bales, it wouldn't cut the net wrap, just keep wrapping. Hooked directly to batteries with a circuit breaker as has been suggested countless times on Agtalk and it never missed a bale the rest of the season. | |
|
JD 568 error code
