|
North Central Illinois | Good point about the booms.
The Advanced TCM calibration option should be there if you go to Menu > Applications > Starfire > then at the bottom it should say Advanced TCM Calibration.
That option should be there on any Gen 4 and G5 displays, both command center and universal. As long as they are paired with a SF6000 or newer receiver, both integrated and universal as well.
With the newer technology the Advanced TCM Calibration is the way to go instead of doing the old school TCM Cal that is located in the receiver page under the Setup tab. | |
|
JD 408R sprayer. Lateral offset for integrated GPS?
