Jeffersonville, OH | Massey1155 - 5/8/2026 08:18
Then you only have one with detent.
Most of them were set up this way.
Edit- yes the detent is on the valve block
Right, and may not even have float honestly. The Hydraulics on a MF 5400 have SO many options, you can go from a single valve and a 15GPM pump to 4 valves on a 29GPM Load Sensing system.
I never ordered the 15GPM system, always the 26GPM Combined Flow system, or Load sensing if a customer wanted....but a LOT of dealers ordered them CHEAP!
Chris |
Massey 5480 lever float
