|
NW Iowa | Alright, here i go...
Do everyone a favor and quit asking AI stuff on Agco tractors.
It's not going to help anybody
There is nothing in those screens that will keep the SV from working.
Pedal mode runs in Economy or power.
Go to your home work screen.
Start simple,
You should be in stick mode with a stick on the screen
Turn off your engine minder
Set your load knob on 30%
Set your sv's where you want them with the turn knob
Put your left hand control in forward, push your throttle to 1500
hit your sv button.
It should highlight and hold speed.
If it does not, an input is telling it not to.
If it selects then slows down, it's being told the engine is being pulled down and it's slowing the trans to hold rpm.
The only other thing is the left had reverser is bad, or the stick is not holding.
Edit- If it thinks you are hitting the brakes(bad brake switch) it will kick sv out.
Edited by Massey1155 5/7/2026 21:48
| |
|
Agco rt155a help getting sv1 sv2 working
