Posted 5/2/2026 06:06 (#11635038) Subject: Pro 1200/1990ccs/raven RCM
ND
Running a 1990 ccs with a raven rcm tied into the factory deere iso for hydraulic drive and having issues with it wanting to bring in a 382.5 implement width instead of 510. Have tried turning off the deere side in the work condition like past years, but it won't turn it off on the task controller. Anybody run into this? Been running this setup 3 years. This is on a magnum with a pro 1200.
Pro 1200/1990ccs/raven RCM
