|
NW Ohio | I'm not much help, but I do believe Accu Control is the same as Trimble's Field IQ system, just running through the Pro 700 so hopefully it's not an impossible task. I've only ever used Trimble's Field IQ system and it is pretty much a follow the prompts on the screen, then calibrate everything and you are good to go. At least that has been my experience with it, but I'm not doing anything overly complicated either. for your metering part, I would be looking in the calibration screen to see what I can find there. the bin level sensor and such are set up during the initial setup screens if I remember correctly. Again, this is all on a Trimble TMX2050. I am not familiar with a pro700. | |
|
adx 2230 case air drill converted to trimble
