|
SE IL | I’ll start by saying I’m not familiar with your setup. My first thought was you possibly need to turn the power on by changing an address in the display and that may be the case. But when I googled it the ai answer is to remove the right rear corner post cover to expose the wires. It says to look for the red wire 262 and the antenna coax. It mentions that that wire should be key powered but if you need constant power to switch the wire in the control center. So I’m wondering if it may not be connected at all in the control center. Just something to check. | |
|
RTK 900 radio no power on John Deere 8R410
