|
| Been having an issue with it not wanting to go in reverse. It has the 18-speed power shift transmission. Sometimes it will reverse just fine, other times it will start to reverse for maybe 4-5 seconds and then kick out, and sometimes it will just not backup at all. If you run the electronic clutch calibration it will work. Sometimes it will work for a while and sometimes not very long. One thing I do notice is when you calibrate the clutches, while doing the forward clutches the timer will start counting up on the screen and run continuously until it is done. When you do the reverse clutch, it will start counting up and then jump back to the beginning and start over and might do that several times before it runs all the way through the calibration. | |
|
Versatile 2210 Help
