|
| Have an issue with the lift cylinders on our 30ft John Deere 724 Mulch finisher. Took the cylinders to a hydraulic shop to get resealed. Ended up getting three new cylinders and they resealed one. Put the cylinders on it a few days ago and it’s having the same issue it had prior to the new cylinders. After you raise it up, the left side will drift down a little it but the right side stays up. I rephrased the cylinders by holding back on the lever after raising for 10-15 seconds. Not sure why it is doing this? Could there still be air in the system? | |
|
John Deere 724 Mulch Finisher Hydraulic issue
