|
Alpha, IA | Yes, I have the complete service manual from Agco. So I took the MC1 and MC2 valves out and both appear to be in good condition. The screens were 100% clean and I took the valve apart and everything is smooth and free. The only thing that I thought looked like it could be out of the ordinary is at the end of the core, before the threads for coil nut, it looks like it could be separated a little but both look exactly the same. I'll attach a photo of the core.
Edited by Ethanrpriebe 4/16/2026 20:01
 (20260414_193811 (full).jpg)
Attachments
----------------
 20260414_193811 (full).jpg (74KB - 7 downloads)
| |
|
Agco 9670 clutch adjustment?
