|
nc IA | Curious for some reasonable product ideas for a flight deck.
Will likely use deck boards for the front / operator portion, but where the drone lands and takes off from I'd like to go with a solid material so that drips / chem / weather will be routed to the outside edges and then run/drip down not covering my cones / generator etc.
Seen a NuWay trailer with a solid one piece composite deck but I can't figure out where to source something like it.
Best I've seen are sheets of poly that could be caulked together if thick enough and strong enough.
Something like a plastic poly, and caulked together has been considered, some of those polys get quite expensive though.
Thought about plywood or decking boards, the putting a vinyl flooring sheet on top of it, issue there is standard flooring vinyl is very slippery already. | |
|
flight decking material ideas
